Connecting To The Epson S5U13U00P00C100 Usb Adapter Board - Epson S5U13L02P00C100 User Manual

Chapter 4 Technical Description

4.4.2 Connecting to the Epson S5U13U00P00C100 USB Adapter Board

The S5U13L02P00C100 Bvaluation Board is designed to connect to a S5U13U00P00C100 USB Adapter Board.
The USB adapter board provides a simple connection to any computer via a USB 2.0 connection. The
S5U13L02P00C100 directly connects to the USB adapter board through connectors P1 and P2.
The USB adapter board also supplies the 3.3V power required by the S5U13L02P00C100. HIOVDD should be
selected for 3.3V and JP4 should be set to the 2-3 position.
When the S5U13L02P00C100 is connected to the S5U13U00P00C100 USB Adapter board, there are 2 LEDs on
the S5U13L02P00C100 which provide a quick visual status of the USB adapter. HB (D300)blinks to indicate that
the USB adapter board is active. ENUM (D301)turns on to indicate that the USB has been enumerated by the PC.
The following diagram shows the location of connectors P1 and P2. P1 and P2 are 2mm x 2mm, 40-pin headers
(20 x 2).
Figure 4-3: USB Adapter Connector Locations (P1 and P2)
For the pinout of connectors P1 and P2, see Section Chapter 6, "Schematic Diagrams" on page 20.
Note
A windows driver must be installed on the PC when the S5U13L02P00C100 is used with the S5U13U00P00C100
USB Adapter Board. The S1D13xxxUSB driver is available vdc.epson.com.
S5U13L02P00C100 Evaluation Board User Manual (Rev. 1.0) EPSON 15