Ups Disposal And Recycling; For Professional Users In The European Union; For Disposal In Countries Outside Of The European Union; Troubleshooting - ABB DPA 250 S4 Operating Manual

7 M A I N T E N A N C E & T R O U B L E S H O OT I N G
—

7.2 UPS disposal and recycling

7.2.1
—

7.3 Troubleshooting

7.3.1
In the event of an alarm condition the red LED-In-
dicator "Alarm" and the acoustic alarm will turn
on. In this case proceed as follows:
• Silence the acoustic alarm by pressing the but-
ton "Reset".
• Identify the cause of the alarm condition by
means of the EVENT LOG in the MAIN menu.
• In case of doubts please contact the nearest
Service Center.
• Fault identification and rectification informa-
tion is given on the following pages.

For professional users in the European Union

THE CROSSED WHEELED BIN SYMBOL ON
THE PRODUCT(S) AND / OR
ACCOMPANYING DOCUMENTS MEANS
THAT USED ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEEE)
SHOULD NOT BE MIXED WITH GENERAL
HOUSEHOLD WASTE.
IF YOU WISH TO DISPOSE OF ELECTRICAL
AND ELECTRONIC EQUIPMENT (EEE),
PLEASE CONTACT YOUR DEALER OR
SUPPLIER FOR FURTHER INFORMATION.
CORRECT WASTE DISPOSAL OF THIS
PRODUCT WILL HELP SAVE VALUABLE
RESOURCES AND PREVENT ANY
POTENTIAL NEGATIVE EFFECTS ON
HUMAN HEALTH AND THE ENVIRONMENT,
WHICH COULD OTHERWISE ARISE FROM
INAPPROPRIATE WASTE HANDLING.

Alarms

7.2.2 For disposal in countries outside of the
European Union
THE CROSSED WHEELED BIN SYMBOL IS
ONLY VALID IN THE EUROPEAN UNION
(EU) MEANING THAT USED ELECTRICAL
AND ELECTRONIC EQUIPMENT (WEEE)
SHOULD NOT BE MIXED WITH GENERAL
HOUSEHOLD
WASTE.
IF YOU WISH TO DISPOSE OF THIS
PRODUCT PLEASE CONTACT YOUR LOCAL
AUTHORITIES OR DEALER AND ASK FOR
THE CORRECT METHOD OF DISPOSAL.
CORRECT WASTE DISPOSAL OF THIS
PRODUCT WILL HELP SAVE VALUABLE
RESOURCES AND PREVENT ANY
POTENTIAL NEGATIVE EFFECTS ON
HUMAN HEALTH AND THE ENVIRONMENT,
WHICH COULD OTHERWISE ARISE FROM
INAPPROPRIATE WASTE HANDLING
7.3.2 Menu, commands, event log and mea-
surements
Chapter 5 contains a detailed description
of the Menu, Commands, Event Log and Measure-
ments that can be operated and displayed on the
LCD. The List of Alarms and Messages are shown
below.
49