Network Management Cards; Smart Port Jd1 (Serial Rs 232 / Sub D9 / Male); Usb Pc / Laptop Interface - ABB DPA 250 S4 Operating Manual

46 D PA 2 5 0 S 4 5 0 - 2 5 0 K W O P E R AT I N G M A N U A L
5.3.3
—
5.3.3-1: CS141 Basic
Support SNMP and
The UPS can be equipped with Network inter-
Modbus TCP/IP
protocols
faces cards allowing for the connection of the
UPS to the digital control system, SCADA, EDS
—
system by SNMP, Modbus RS-485 and Modbus
5.3.3-2: CS141 Advanced
TCP/IP protocols.
Support SNMP,
Modbus TCP/IP and
Peripheral options
The network management cards offers:
• Real-time monitoring of the status of the UPS
system via web
—
5.3.3-3: CS141 Modbus
• Event log records in a log file
Support SNMP,
• Safety remote shutdown of the UPS
Modbus TCP/IP and
ModBus RS485
—
5.3.3-2
5.3.4
—
5.3.4-1: Connector
Cable - PC Serial Port
The smart port JD1 located on the customer interface board is a RS 232 serial port. It is D-type connec-
with 9-Pin Connection
tor, 9-pin male. The RS232 interface allows the user to connect the UPS unit to a computer and monitor
the UPS status by using the Wavemon software. Further it is used to download system event log and
make firmware upgrades.
The figure 5.3.4-1 shows how to connect a PC to the UPS with different Sub-D connectors.
5.3.5
The Computer Interface USB has the same function as the RS 232 serial port JD1. Use either USB or
RS232 but not both at the same time.

Network management cards

Smart port JD1 (Serial RS 232 / Sub D9 / Male)

USB PC / Laptop Interface

—
5.3.3-1
—
5.3.3-3
—
5.3.4-1