Installation; Usb Driver - Epson S5U13U00P00C100 User Manual

3 Installation

3.1 USB driver

Note
S5U13U00P00C100 USB 2.0 Adapter Board
Rev. 1.1
S5U13U00P00C100 board should be connected to the Epson LCD Controllers evaluation
board before applying power. To connect the boards, align sockets P1 and P2 on
S5U13U00P00C100 board with headers P1 and P2 on the Epson LCD Controllers evalu-
ation board and connect the two boards.
After the boards are connected, 5V power may be connected to S5U13U00P00C100. Once
the power is applied, the USB cable from the PC may be connected to S5U13U00P00C100
board.
S5U13U00P00C100 USB Adapter board needs the Epson USB driver, S1D13XXXUSB,
installed on the host computer.
The driver may be installed prior to connecting the S5U13U00P00C100 board to the USB
or at the time of the first connection, when the Windows will detect new hardware and will
prompt to install the driver.
If the board does not work after USB cable is connected, remove the USB cable, remove
the power and then connect the power back and reconnect the USB cable.
Seiko Epson Corporation
Installation
7