Ricoh Ch-C1 Series Service Training page 537

Comparison with Previous/Similar Models:
No.
1 Waste Toner Bottle (WTB) cannot be
replaced during machine operation.
WTB can be replaced during machine
operation on Taurus-C1.
2 Waste toner bottle full sensor is deleted.
In the Ch-C1, after the sensor detects near-
full, the machine uses the pixel count of
previous jobs to calculate the remaining
number of prints until the WTB becomes
full.
3 Waste toner bottle can be handled as a
supply, as the toner cartridges are.
The end user can also replace the WTB,
with the assistance of the animated
instructions provided on the LCD.
User replacement is the default setting for
the WTB in SP mode (SP5-073), but this can
be changed to technician replacement in
accordance with the contract with the
customer.
Slide 537
No additional notes
Used Toner Collection
Different points from previous model
(Taurus-C1)
Pro Office Reason for change

No No There is no request
from the field

Yes Yes Cost reduction

Yes Yes To reduce the EM calls
caused by SC484
(Waste toner bottle
full)

To reduce machine
down time
537
Ch-C1 Training
537