Toner remaining on the PTR is sent back to the ITB, by reversing
the polarity of the PTR while it is in contact with the ITB.
It is done at the start of each job, or when recovering from a
paper jam or SC condition.
The duration of cleaning when recovering from a jam or SC can be
Pro models only: Cleaning is done between every sheet. Voltage
for the non-image area is applied between sheets. The timing for
switching between image and non-image areas can be adjusted
with SP mode.
Slide 474
No additional notes
Cleaning
adjusted with SP 2692-001.
474
Ch-C1 Training