Ricoh Ch-C1 Series Service Training page 124

Installing the Two-tray Cover Interposer
 First, dock the transport unit of the cover
interposer to the copier.
 Important: Do not put the tray unit on the top of the
cover interposer at this time.
 Then, install the next device to the left of the
cover interposer.
 Finally, attach the tray unit to the top of the cover
interposer.
 The tray unit is supported by the cover interposer,
and the next unit to the left.
 Do not attach the tray unit to the top of the cover
interposer until after you dock the next device to
the left of the cover interposer.
Slide 124
Installation > Cover Interposer Tray (D518)
124
Ch-C1 Training