Appearance – Pro Version (Basic System)
In the Pro version:
There is a status light pole
The operation panel is separated from the main unit.
Each paper tray has an indicator to show if the tray is currently
active, so that the customer will not open a tray while it is feeding
This picture shows the following configuration:
Mainframe + 13"x19.2" LCT + 2,000-sheet Booklet Finisher
Slide 5
The full range of options and combinations will be shown later. These are
just examples.
The ADF is standard for all models. It is a single pass duplex ADF, and its
scanning speed is 100ipm in simplex mode and 200ipm in duplex mode.
5
Ch-C1 Training