Ricoh Ch-C1 Series Service Training page 512

 Smoothing is not done automatically.
 It must be executed manually by the user with
Special Operator Adjustment (0210-01).
 Also possible with SP 1133-110.
 When you execute this function more than three
 The roller rotates for 3 minutes at one time.
 Near end: 168 minutes
 This can be changed with SP1133-131.
 End: 180 minutes
 This can be changed with SP1133-132.
Slide 512
No additional notes
When is Smoothing Done?
times in a row but no improvement appears,
replace the fusing belt.
512
Ch-C1 Training