What To Do If - GEZE Perlan AUT-NT User Manual

GEZE Perlan AUT-NT
8

What to do if...?

Problem
Sliding leaf only opens and
closes slowly
Sliding leaf opens and closes
constantly
Sliding leaf only opens a crack Obstruction on the sliding path
Sliding door does not open
Sliding leaf does not close
Cause
Obstruction on the sliding path
Floor guide area soiled
Obstruction on the sliding path
Light beams or reflections
Objects moving in the field of detec-
tion of the movement detector(s)
(plants, paper, etc.)
Obstruction on the sliding path
Movement detector misaligned or
defective
Stop activated
Obstruction on the sliding path
Movement detector controls uninter-
ruptedly
No power supply (e.g. power failure) See wiring diagram Perlan AUT-NT,
Remedy
Remove obstacle and check sliding leaf for
X
ease of movement.
Disconnect power supply (Emergency-stop
X
switch
or customer-accessible fuse).
Clean floor guide area.
X
Remove obstruction and check door leaf for
X
ease of movement.
Check detection field of motion detector.
X
Remove obstruction and check door leaf for
X
ease of movement.
Remove obstruction and check door leaf for
X
ease of movement.
Check the movement detector. If necessary,
X
notify a service technician.
Unlock the stop function.
X
Remove obstruction and check door leaf for
X
ease of movement.
Check the movement detector. If necessary,
X
notify a service technician.
Mat. No. 139997, Chapter Commissioning
What to do if...?
9