Watchdog Submenu; Hardware Health Monitoring Submenu - Efco SmartSL User Manual

6.4.1

Watchdog Submenu

Feature Options
POST Watchdog Disabled
30 seconds
Intervals (minutes) 1, 2, 5, 10, 30
Stop for User Interaction Yes / No
Disabled
One-time Trigger
Runtime Watchdog
Single event
Repeat event
Delay Disabled
Intervals (seconds) 10,30
Intervals (minutes) 1, 2, 5, 10, 30
ACPI Event
Event 1 Reset
Power Button
Disabled
ACPI Event
Event 2
Reset
Power Button
Disabled
ACPI Event
Event 3
Reset
Power Button
Time out 1
Intervals (seconds) 1, 2, 5, 10, 30
Intervals (minutes) 1, 2, 5, 10, 30
Time out 1
Intervals (seconds) 1, 2, 5, 10, 30
Intervals (minutes) 1, 2, 5, 10, 30
Time out 1
Intervals (seconds) 1, 2, 5, 10, 30
Intervals (minutes) 1, 2, 5, 10, 30
Watchdog ACPI Shutdown
Event Restart
6.4.2

Hardware Health Monitoring Submenu

Feature Options
CPU Temperature
Board Temperature
5V Standard
5V Standby
Input Current ( 5V
Standard)
CPU Fan Speed
Fan PWM Frequency
Low Frequency
Mode
High Frequency
Fan PWM Frequency
(kHz)
Description
Configure POST Watchdog
Decide if POST watchdog should be stopped during
Setup of boot menu or while waiting for a password
Select the delay time before the runtime watchdog
becomes active. This ensures the system has
enough time to load
Select the type of event that will be generated when
timeout 1 is reached.
Select the type of event that will be generated when
timeout 2 is reached.
Select the type of event that will be generated when
timeout 3 is reached.
Select the timeout value for the first stage watchdog
event
Select the timeout value for the second stage
watchdog event
Select the timeout value for the third stage watchdog
event
Select the operating system event that is initiated by
the watchdog ACPI
Note: These options preform a critical but orderly
O/S shutdown or restart.
Description
N/A Displays the actual CPU Temperature in Celsius
N/A Displays the actual Board Temperature in Celsius
N/A Displays the actual 5V Voltage
N/A Displays the actual 5V Voltage
N/A Displays the Actual Input Current of 5V power plane
N/A Displays the actual CPU Fan Speed in RPM
Select the fan PWM base frequency mode
11.0 to 88.2Hz
1k to 63kHz
1 - 63 Select the fan PMW base frequency (1kHz–63kHZ)
38
SmartSL User Manual