Table of Contents
Advertisement
6.4.7
Trusted Computing Submenu
Feature
Options
Disabled
Security Device
Support
Enabled
6.4.8
RTC Wake Settings Submenu
Feature
Options
Disabled
RTC Wake Mode
Wake from S5 only
Wake from S4 and S5
Wake from S3, S4, and
S5
Wake up hour
Wake up minute
Wake up second
6.4.9
Module Serial Ports Submenu
Feature
Options
Disabled
Serial Port 0
Enabled in PCI mode
Enabled in ACPI mode
6.4.10
Reserve Legacy Interrupt Submenu
Feature
Options
None
IRQ3
IRQ4
IRQ5
Reserve Legacy
Interrupt 1/2/3
IRQ6
IRQ10
IRQ11
IRQ14
IRQ15
Description
Enable or disable BIOS support for a security
device. O.S. will not show the security device.
TCG EFI protocol and INT1A interface will not
be available.
Description
Set system wake mode on alarm event. When
enabled, the system will wake from the
specified Sx states on the hr.: min: sec
specified.
Select 0-23. For example, enter 3 for 3 am and
15 for 3 pm.
0-59
0-59
Description
Enable or disable module serial port 0. PCI
mode for Windows 7 or ACPI mode for
Windows 8.x and newer and Linux
Description
The interrupt reserved here will not be assigned
to any PCI or PCI Express device and thus may
be available for some legacy bus device.
41
SmartSL User Manual
Advertisement
Table of Contents
