Graphics Power Management Control Submenu; Memory Configuration Options Submenu - Efco SmartSL User Manual

6.5.1.2 Graphics Power Management Control Submenu

Feature Options
Enabled
RC6(Render Standby)
Disabled
Enabled
Power Meter Lock
Disabled

6.5.1.3 Memory Configuration Options Submenu

Feature Options
Rank Margin Tool EV
Disabled
Mode
Enabled
DDR DVFS Disabled
Enabled
Memory Frequency
Disabled
Override
Enabled
Auto
800
1067
1600
800(SKU333)
Frequency A Selection 1000(SKU333)
1333(SKU333)
900(SKU360)
1800(SKU360)
933(SKU373)
1866(SKU373)
Auto
1067
800(SKU333)
Frequency B Selection
1000(SKU333)
900(SKU360)
933(SKU373)
Disabled
Auto Detect LPDDR3
DRAM
Enabled
1 Rank
LPDDR3 Chip Select
2 Ranks
Description
Check to enable render standby support.
Enable/Disable Power Meter Lock.
Description
Enable/Disable Rank Margin Tool print out
message support.
Please make sure MRS Debug Message Level
at least minimum
Enable or disable DDR Dynamic Voltage and
Frequency Scaling in MRC
Allows override of memory frequency
parameters that are automatically obtained
from DDR3 DIMM SPD. May cause memory
instability if the selected frequency is not
supported by the memory device. This option
does not affect systems configured without
'UseDimmSpd' option
Frequency A Selection
Option to Select Frequency B (Min DDR DVFS
Frequency)
Enable or disable automatic detection of
LPDDR3 DRAM parameters
LPDDR3 Chip Select (Number of Rank)
Configuration.
Auto Detect must be disabled to use this
option.
55
SmartSL User Manual