Save & Exit Setup - Efco SmartSL User Manual

Feature Options
Auto (Battery
Manager)
Battery-Only On
I2C Bus
Battery Support
Battery-Only On
SMBus
G3/Mech Off
System Off Mode
S5/Sof Off
Disabled
Quiet Boot
Enabled
Device-Based Boot
Priority
Disabled
UEFI Fast Boot
Enabled
Disabled
UEFI Screenshot
Capability
Enabled
Default
New Boot Option Policy Place First
Place Last
6.8
6.8 Save & Exit Setup
Select the Save & Exit tab from the setup menu to enter the Save & Exit setup screen.
Feature Options
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and
Reset
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Generate Menu Layout File
Description
Battery system support selection. Select
'Battery-Only On I2C
Bus' for battery-only systems using I2C bus
and 'Battery-Only
On SMBus' for battery-only systems using
SMBus. Select Auto for systems equipped
with a real battery system manager
(connected via 12C or SMBus)
Define the system state after shutdown when
a battery system is present.
Enables or disables Quiet Boot option
Device Boot Priority Selection
Enable or disable boot with initialization of a
minimal set of devices required to launch an
active boot option. It does not affect
BBS/legacy boot options.
If Enabled, you can press LCtrl+Lalt+F12 to
take a screenshot from the current screen. It
will be saved as a PNG image on the first
writable FAT32 partition found.
Controls the placement of newly detected
UEFI boot options
Description
Exit system setup after saving the changes.
Exit system setup without saving any changes.
Reset the system after saving the changes.
Reset system setup without saving any
changes.
Save changes made so far to any of the setup
options.
Discard changes made so far to any of the
setup options.
Restore/Load default values for all setup
options.
Save the changes done so far as User
Defaults.
Restore the User Defaults to all the setup
options.
The menu layout file will be generated and
stored on the first writable file system found.
62
SmartSL User Manual