Table of Contents
Advertisement
6.4.16
PPM Configuration Submenu
Feature
Options
Disabled
EIST
Enabled
Disabled
CPU C state Report
Enabled
C7
Max CPU C-state
C6
C1
Disabled
SOix
Enabled
6.4.17
Thermal Configuration Submenu
Feature
Options
Disabled
DTS
Enabled
Critical Trip Point
OS Hibernate Temperature
Passive Trip Point
Full Speed Fan Trip Point
Half-Speed Fan Trip Point
Fan Hysteresis
Description
Enable/Disable Intel SpeedStep
Enable/Disable CPU C state report to OS
This option controls Max C state that the processor
will support.
Enable/Disable CPU SOix state
Description
Enabled/Disabled Digital Thermal Sensor.
This value controls the temperature of the ACPI
critical Trip Point - the point in which the OS will
95
shut the system off.
Note: 100C is the Plan of Record (PDR) for all
Intel Mobile processors.
The temperature that should cause the OS to
85
trigger the system to hibernate
This value controls the temperature of the ACPI
85
critical Trip Point - the point in which the OS will
begin throttling the processor.
The temperature at which the fan device will be
80
activated at full speed
The temperature at which the fan device will be
60
activated at half speed
The number of degrees below the fan activation
7
threshold that must be reached before turning off
the fan
45
SmartSL User Manual
Advertisement
Table of Contents
