Front Panel I/O Function; Power Button With Power Led - Efco SmartSL User Manual

Right side/Left side I/O
3.2

Front Panel I/O Function

Most standard computer I/O functions are placed on the front panel. In this section, we'll
illustrate each I/O feature on the front panel.

3.2.1 Power Button with Power LED

The power button is a non-latched switch with LED for ATX mode on/off operation. To
turn on the SmartSL, press the power button, and the Green LED will light up. To turn
off the SmartSL, a command in the OS can be issued to shut down the system, or just
simply press the power button. To force a hard reset, press and hold the power button
for 5 seconds to manually shut down the system.
Note:
A five-second interval is required by the system between two on/off operations
(i.e., once the system is turned off, you need to wait for five seconds to initiate
another power-on operation).
SmartSL User Manual
11