Table of Contents
Advertisement
6.4.18
SATA Submenu
Feature
Options
Enabled
SATA Controller
Disabled
SATA Mode Selection
AHCI
Gen1
SATA Interface Speed
Gen2
Gen3
Enabled
SATA Test Mode
Disabled
Enabled
Aggressive LPM Support
Disabled
Software Feature Mask
submenu
Configuration
SATA Port 0
Enabled
Port 0
Disabled
Enabled
Spin Up Device
Disabled
Device Sleep Support
Enabled
Disabled
Port 1
Enabled
Disabled
Enabled
Spin Up Device
Disabled
Enabled
Device Sleep Support
Disabled
Software Feature Mask Configuration Submenu
Feature
Options
Description
Enabled
SSD/HDD
If enabled, indicates that the SSD/HDD password unlock in
Unlock
the O/S is enabled.
Disabled
Enabled
If enabled, indicates that the LED/SGPIO hardware is
LED Locate
attached, and ping to locate feature is enabled in the OS.
Disabled
Description
Enable/Disable SATA Device
Determines how the SATA controller operates.
Select SATA Interface Speed, CHV A1 always
with Gen1 Speed.
Test Mode enable/disable.
Enable PCH to enter link power state
aggressively.
RAID OPROM/RST driver will refer to the SWFM
configuration to enable/disable the storage
features.
Enable / Disable SATA Port.
If enabled for any ports, Staggered Spin Up will
be performed, and only the drivers which have
this option enabled will spin up at boot.
Otherwise, all drivers spin up at boot.
Enable/Disable Device Sleep Support on that
port.
Enable / Disable SATA Port.
If enabled for any ports, Staggered Spin Up will
be performed, and only the drivers which have
this option enabled will spin up at boot.
Otherwise, all drivers spin up at boot.
Enable/Disable Device Sleep Support on that
port.
46
SmartSL User Manual
Advertisement
Table of Contents
