Actions - Bosch FPC‑500 Operation Manual

22 en | Operation
If you accessed operating level 2 using the optional key, turn the
key back and remove it from the lock to exit operating level 2.
4.2.1

Actions

Switching between day and night mode
In day mode, delay times are activated in zones that are
programmed as alarm verification.
Performing a reset
RESET
ACK
Trigger evacuation, test alarm
Notice!
Only trigger an evacuation if you want to trigger a test alarm.
You can only trigger a test alarm when the fire panel is in the
normal state.
2019.07 | 5.1 | F.01U.172.982
– Press the "Reset" key.
You remain in operating level 2.
Press the "Day/night mode" key.
The "Day mode" LED is illuminated in day mode and
deactivated in night mode. The LCD shows Normal
in night mode and Normal Day in day mode.
Press the "Reset" key.
– Press the ACK key.
RESET
The fire panel performs a reset if it is not in a
normal state.
– Press the "Reset" key.
No reset is performed.
Conventional fire panel
Bosch Sicherheitssysteme GmbH