Operating Level - Bosch FPC‑500 Operation Manual

Conventional fire panel
Hide thumbs Also See for FPC‑500:
Table of Contents

Advertisement

Conventional fire panel
4.2

Operating Level 2

To be able to perform the actions in operating level 2, you will
need a code you can enter with the zone keys.
Calling up operating level 2 via a code
C O D E /
If you are in level 2, a small 2 is displayed in the top right corner
of the display.
Calling up operating level 2 via a key (optional)
Use the key to open operating level 2. Leave the key turned in
the lock while you are working in operating level 2.
Automatic exit of level 2
If you are in level 2 and a key has not been pressed for 10
minutes, the system will exit level 2 automatically. This also
applies if you are using a key.
One minute before exiting level 2, a pulse tone from the internal
buzzer indicates the passing time, while a countdown is shown
in the LCD display.
Exiting operating level 2
If you are in operating level 2, proceed as follows.
ACK
Bosch Sicherheitssysteme GmbH
Press the "Code input" key.
You will be prompted to enter a code.
Enter the code with zone keys 1 to 8. The preset
code is 1234. The code can be changed in operating
level 3.
Press the "Code input" key.
Press the ACK key.
RESET
You exit operating level 2.
Operation | en
2019.07 | 5.1 | F.01U.172.982
21

Advertisement

Table of Contents
loading

Table of Contents