Bosch FPC‑500 Operation Manual page 19

Conventional fire panel
Displaying zones in test mode
Shows a list of all current zones in test mode, including the time
stamp.
i
3
Displaying pre-alarms
Displays a list of all current pre-alarms with the corresponding
time stamps.
i
4
Displaying the event log
Displays a list of all events with the corresponding time stamps.
A list of events can be found in Event Memory, page 32
i
1
You can use the arrow keys to switch between the individual
entries. If you press and hold an arrow key, the display moves
10 steps in the corresponding direction. A description of the
displayed events can be found on Event Memory, page 32 ff.
Displaying the test log
Call up the menu; see Opening the menu, page 18
i
Bosch Sicherheitssysteme GmbH
Press the "Menu" key and then zone key 1.
1
This takes you to the Current Events submenu.
Press zone key 3.
The LCD display shows the current tests.
Press the "Menu" key and then zone key 1.
1
This takes you to the Current Events submenu.
Press zone key 4.
The LCD display shows the current pre-alarms.
Press the "Menu" key and then zone key 2.
2
This takes you to the History submenu.
Press zone key 1.
The messages in the event memory are displayed.
Press the "Menu" key and then zone key 2.
2
This takes you to the History submenu.
Operation | en
2019.07 | 5.1 | F.01U.172.982
19