Appendix; Event Memory - Bosch FPC‑500 Operation Manual

Conventional fire panel
Hide thumbs Also See for FPC‑500:
Table of Contents

Advertisement

32
en | Appendix
Record all events, such as alarms, faults and services, in this log
book.
Ensure that an inspection is carried out on your fire detection
system four times a year at roughly regular intervals.
Ensure that the following function checks are carried out during
the inspection:
Record the inspection and the results in the log book.
Carry out the following additional checks at least once a year:
Notice!
Have maintenance and inspection work carried out regularly by
trained, qualified personnel
Please observe the appropriate requirements stipulated by the
local authorities (e.g. fire service)
Notice!
Replace the batteries regularly. Please observe the appropriate
requirements stipulated by the local authorities etc.
7

Appendix

7.1

Event Memory

Message
Drill/Evacuate
2019.07 | 5.1 | F.01U.172.982
Trigger an automatic detector for each zone to check the
transmission lines and notification appliances
Test the condition of the batteries and the function of the
power supply unit
Check the log book
Check all elements of the fire panel
Trigger all detectors that can be tested without being
damaged
Visually check all cabling and elements
Meaning
A manual alarm has been triggered on the
panel.
Conventional fire panel
Bosch Sicherheitssysteme GmbH

Advertisement

Table of Contents
loading

Table of Contents