Bosch FPC‑500 Operation Manual page 9

Conventional fire panel
Normal Day
01/01/11 01:00
Normal display with current time and date in daytime mode.
Fault displays
1 2 3 4 5 6 7 8
| F | D | | | T | |
NAC Open
Used to display faults. Zones where there is a fault are flagged
with corresponding letters.
In addition, fault messages are displayed in plain text in the
bottom line. If there is more than one fault, the display changes
every 1.5 seconds.
The following abbreviations are used:
–
–
–
Pre-Alarms
1 2 3 4 5 6 7 8
| P | P | | | P | |
PreAlarms: 3
Display of pre-alarms. Zones that have triggered a pre-alarm are
flagged
In addition, the total number of pre-alarms is displayed in the
bottom line. The pre-alarms are then displayed one after another
in order of their appearance.
Alarms
1 2 3 4 5 6 7 8
| ? | | | | | |
Fire Alarms: 1
Bosch Sicherheitssysteme GmbH
F = Fault (short-circuit/open/creeping short-circuit/creeping
open)
D =Disabled
T = Test
System Overview | en
2019.07 | 5.1 | F.01U.172.982
9