Bosch FPC‑500 Operation Manual page 29

Conventional fire panel
RESET
Setting the date/time
i
1
ACK
Repeat the steps to set the month, year, hour and minute.
Setting the buzzer beep
i
Bosch Sicherheitssysteme GmbH
The set configuration is automatically shown in the
i
LCD display. The individual settings are displayed
successively at 2.5-second intervals. If you use the
arrow keys to navigate manually through the
configuration display, the automatic process is
cancelled.
Press the "Reset" key.
You exit the configuration display.
Press the "Menu" key and then zone key 6.
6
This takes you to the System Config submenu.
Press zone key 1.
You can now set the date and time.
The current entry is displayed.
i
Use the arrow keys to change the flashing value.
To save the currently displayed value, press the ACK
key.
Press the "Menu" key and then zone key 6.
6
This takes you to the System Config submenu.
Operation | en
2019.07 | 5.1 | F.01U.172.982
29