Tally Dascom DT-210 User Manual page 78

Tally Dascom DT-210/230
Here is the self test status page and its explanation. The printout is an example. It may differ
depending of installed options or interfaces:
Model
Firmware Version
S/N
Interface
Number of data bits
Number of stop bits
Flow Control
Parity Checking
Receive error method
Buffer size
Resident Character Types
Density level
DIP Switch setting
3.
Press the FEED button while the printer is in the self-test mode.
Then the printer will print a rolling pattern using only the built-in character set.
After printing the following message, the printer is initialized and returned to the normal mode.
SELF-TEST
Model DT-230
Firmware Version : SV1.02.16
S/N: 000000000000
Serial Interface
Baud Rate
Data bits
Stop bits
Flow Control
Parity Checking
Receive error
Buffer Capacity
48K bytes
Resident Character
Alphanumeric
Simple Chinese
Print Density
LIGHT [ 1 2 3 4 ] DARK
Print Speed : 260mm/s
Paper Width : 80mm
BM sensor : Disable
DIP Switch1
1 2 3 4 5 6 7 8
On
Off * * * * * * * *
DIP Switch1
1 2 3 4 5 6 7 8
On
Off * * * * * * * *
If y ou want to continue SELF-TEST
Printing, please press FEED button!
63
User Guide V1.3
: 19200 bps
: 8 bits
: 1 bit
: DTR/DSR
: None
: print '?'