Connecting To Computer; Connection Cable Requirement - Tally Dascom DT-210 User Manual

Tally Dascom DT-210/230

2.6 Connecting to Computer

NOTE!
Be sure to install the driver before connecting the printer to the host computer.
Before installing, disconnect the Power Unit from the printer (as well as turning the power switch
off). Even when the power switch is off, voltage is still present at some points on the circuit board.
Changing components while the power unit is connected can cause damage to the interface board
and the printer.
Component
Power Socket
Cash Drawer Interface
USB Interface
Modular Interface

2.6.1 Connection Cable Requirement

Connection cable must comply with the following requirements:
Connection Type
USB
Serial
Parallel
Cash Drawer
Ethernet
Connects power supply to the printer.
Connects Cash Drawer interface cable from the cash drawer.
Connects USB interface cable from the host.
Connects optional interface (Serial I/F, Parallel I/F, Ethernet I/F or Wi-Fi
I/F) from the host.
Function
Specifications
USB 1.1/2.0 compatible
RS232
IEEE 1284.4
10 Base-T/100 Base-TX compatible
20
User Guide V1.3