Tally Dascom DT-210/230
3.5 Self Test for Ethernet and Wi-Fi
3.6.1 Ethernet
Self-test
Press Reset key with the tip of pen or a small tool when the printer is on. The printer will print out an
Ethernet parameter.
Here is the self-test information:
Firmware
IP address
Subnet Mask
GateWay
DHCP
MAC Address
3.6.2 Wi-Fi
Self-test
Press Reset key with the tip of pen or a small tool when the printer is on. The printer will print out
current software edition and the TCP/IP setting information of the interface card.
Reset key
Here is the self-test information:
Firmware:V1.0.04.01
WIFI mode:AP (by default), STA, AP+STA
SSID:DT-230_WIFI
Encryption:OPEN
IP address:192.168.0.33
Subnet Mask:255.255.255.0
GateWay:192.168.1.1
:V1.03.10
:192.168.1.31
:255.255.255.0
:192.168.1.1
: Disable or Enable
:xx-xx-xx-xx-xx-xx
Reset Key
40
User Guide V1.3
Need help?
Do you have a question about the DT-210 and is the answer not in the manual?
Questions and answers