Wi-Fi Setting - Tally Dascom DT-210 User Manual

Tally Dascom DT-210/230
3.
Write the I
4.
P address, subnet, and maskgate, and then click "OK".
5.
You would hear a sound from the printer, indicating the new setting is verified. Like the picture
shows:

3.7 Wi-Fi Setting

If your printer connected to the computer with Wireless Ethernet, there are two kinds of modes: AP
mode and STA mode.

AP means Access Point (AdHoc Mode). When the printer is working under AP mode, it works as
an access point to the cable network for the user.

STA means Station mode (Infra Structure Mode). When the printer is working under STA mode, it
works as a wireless terminal device. It is discoverable and choose access point.
We would suggest you use AP mode for your initial usage. Factory setting: AP mode, at the convenience
of users to change Wi-Fi parameters. Users can get access via web page to change Wi-Fi parameters,
such as IP address, network name, or switching to STA mode.
43
User Guide V1.3