Table of Contents
Advertisement
■
1.In order to ensure the projector could work normally. It should be kept
clean always .The lens should also be regularly cleaned to maintain an
optimum light output. Do not use any type of solvent on lens. It will
damage the projector.
■
2.Suggestion: The continue usage of the light don't exceed 4 hours. Or it
will shorter the usage of the lamp. Please use the alternative operation
to solve this problem.The fixture power ON time is best not over 48
hours, or it would generate lamp protection procedure.
■
3.Please disconnect the power supply when begin to maintenance take
down the light. Please let the parts cool down 10 minute at least then
begin to install.
■
4.Please inspect the lens or other moving parts timing and keep them clear
and static. If find anything damaged or looseness must change a lamp or
fix the lamp in order to avoid the accident.
CAUTION!
Disconnect from mains before starting maintenance operation.
DUTY EXONERATIVE AND COPYRIGHT PROTECTION
◎
Any products broken that didn't according to the instruction is not guarantee to
keep it in good repair.
◎
The commentar y for all the instruction belongs to the supplier in final.
◎
No authorize can't copy.
CLEANING AND MAINTENANCE
15
Advertisement
Table of Contents
