Dakota Digital VHX-1018 Installation

Universal instrument

Download this manual

Your new VHX-1018 kit includes:

VHX Display

Universal Sender Pack

Switch Assembly

Installation

1. Use the provided template to mark out the opening needed to fit the VHX display. Ensure there is

adequate clearance behind the desired mounting location. The display unit needs approximately two

inches of depth behind the dash.

VHX-1018

Dakota Digital Universal VHX Instrument Installation

Installation Manuals

and Cutout Template

CAT5 Cable

(4x) L-Brackets

and Thumb Nuts

Control Box

Manual # 650419A

Page 1 VHX-1018 Dakota Digital Universal VHX Instrument Installation Your new VHX-1018 kit includes: VHX Display Installation Manuals Universal Sender Pack and Cutout Template (4x) L-Brackets and Thumb Nuts Switch Assembly CAT5 Cable Control Box Installation 1. Use the provided template to mark out the opening needed to fit the VHX display. Ensure there is adequate clearance behind the desired mounting location.
Page 2 2. With the appropriate opening cut, place the VHX display into the dash and attach the four (4) L- brackets to the back of the display using the provided thumb nuts. 3. Attach the provided CAT5 Cable to the back of the VHX display and carefully route the other end to the control box mounting location.