Page 1
VHX-1200 Dakota Digital VHX Instrument Installation for Marquez Designs 1967-‘69 Camaro Dash Your new VHX-1200 kit includes: VHX Display Switch harness Control Box Installation Manuals Cut Template Universal Sender Pack CAT5 Cable Installation This cluster is designed to be a direct fit to Marquez Designs 1967-’69 Camaro dash. If this cluster is going to be mounted universally, skip to Step 4 and use the provided template to mark the opening needed to fit the VHX display in the desired location.
Page 2
2. Attach the VHX system to the fiberglass insert using the provided hardware from Marquez Design as well as the L-bracket. The lower section of the VHX system will mount to the lower half of the dash using hardware also provided by Marquez Design. L-Bracket 3.
Page 3
4. Use the diagram below to verify the measurements will fit the desired mounting location. 5. Ensure the cut out template is flat and secure before marking the cut line so the opening will be the right size and location. 6.
Page 4
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Manual # 650432B...