Dakota Digital VHX-1023 Installation

Download this manual

Your new VHX-1023 kit includes:

VHX Display

Universal Sender Pack

Switch Assembly

Installation

1. Use the provided template to mark out the opening needed to fit the VHX display. Ensure there is

adequate clearance behind the desired mounting location. The display unit needs approximately

2 1/8" of depth behind the dash.

VHX-1023

Dakota Digital Universal VHX Instrument Installation

Installation Manuals

and Cutout Template

CAT5 Cable

(5x) L-Brackets

and Thumb Nuts

(5x) Mounting Studs

Control Box

(5x) Nuts and

Lock Washers

Manual # 650501A

Page 1 VHX-1023 Dakota Digital Universal VHX Instrument Installation Your new VHX-1023 kit includes: VHX Display Installation Manuals Universal Sender Pack (5x) L-Brackets and Cutout Template and Thumb Nuts (5x) Mounting Studs (5x) Nuts and Lock Washers Switch Assembly CAT5 Cable Control Box Installation 1.
Page 2 2. With the appropriate opening cut, choose the best locations for using 4-5 of the provided L-brackets to secure the VHX system to the dash. Remove the existing screws in those locations and secure the studs in place of the screw by using the lock washers and nuts.