Page 1
RLC-49F Dakota Digital RLC Clock Installation For 1949-‘50 Ford cars Your new RLC-49F kit includes: RLC Clock RLC Harness RLC Operation Manual 2x 8-18 x 3/4” Screws Installation 1. Remove the original clock by disconnecting the wiring and removing two screws behind the dash.
Page 2
2. Secure the new RLC clock to the dash using the two supplied 8-18 x 3/4” screws. 3. Connect the provided RLC harness to the clock and carefully route the other end to the RTX control box. Refer to the enclosed clock operation manual to complete the RLC clock setup. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.