Drive Pulley Disassembly - KYMCO XCITING S 400 Manual

7. CVT Transmission > CVT Removal XCITING 400i
Remove the right (movable) face of the drive pulley from the crankshaft.
Slide the bushing out of the movable drive face.

Drive Pulley Disassembly

Inspect the faces of the drive pulley. Clean away any grease from the faces.
Inspect the oil seal of the drive pulley for broken or excessive wear.
XCITING 400I XCITING S 400
Lift the ramp plate out of the back of the left drive pulley face.
4‐14