Configuration And Parameter List - Samson TROVIS 5724-8 Series Mounting And Operating Instructions

Annex

10.2 Configuration and parameter list

Note
The default setting depends on the selected system code number. A list of all default settings
is available on page 54.
CO/PA Function/
designation
I ... Inputs and outputs
Universal input I1/Universal input I2/Universal input I3
I1/I2/I3 Function
AI1.COR/ Offset AI1
AI2.COR/ Offset AI2
AI3.COR* Offset AI3
Function generation AI1/Function generation AI2/Function generation AI3
AI1.I1/ Input signal, point 1
AI2.I1/
AI3.I1
AI1.O1/ Output signal, point 1
AI2.O1/
AI3.O1
AI1.I2/ Input signal, point 2
AI2.I2/
AI3.I3
AI1.O2/ Output signal, point 2
AI2.O2/
AI3.O2
Universal input I4
I4 Function
AI4.I1 Input signal, point 1
38
Setting/
adjustment range
0: None
1: DI1 not inverted
2: DI1 inverted
3: AI1 (Pt 1000)
–9.9 to +9.9 °C
–50 to +149 °C
–50 to +150 °C
–49 to +150 °C
–50 to +150 °C
0: None
1: DI4 not inverted
2: DI4 inverted
4: AI4 (0 to 10 V)
0.0 to 99.9 %
* Parameters are listed in Service folder > Start-up.
EB 5724-8 EN