Accessories - Samson TROVIS 5724-8 Series Mounting And Operating Instructions

− Device version [A] with two-wire con-
necting cable (voltage supply) and two
Pt 1000 sensors
− Device version [B] with three-wire con-
necting cable (voltage supply and switch-
ing output) and two Pt 1000 sensors
− Device version [C] with two-wire con-
necting cable (voltage supply), two
Pt 1000 sensors and a four-wire control
line for two further inputs
− Device version [D] with three-wire con-
necting cable (voltage supply and switch-
ing output), two Pt 1000 sensors and a
four-wire control line for two further in-
puts
Table 1: Device versions ([A], [B], [C], [D]) and their possible implementation
System code numbers 20, 60
System code numbers 1, 10, 21, 30, 50, 70,
80
System code numbers 65, 66
System code numbers 35, 55, 95
• Recommended
• Possible
EB 5724-8 EN

3.5 Accessories

Accessories for communication
− TROVIS-VIEW software
− Bus connecting cable for Modbus RTU
− USB-RS485 adapter R3 for direct config-
Accessories for control
− Single-channel digital time switch with
Version [A]
•
o
–
–
o Possible when the switching output is not used
– Not possible
Design and principle of operation
The TROVIS-VIEW software can be
downloaded free of charge from our
website (u www.samsongroup.com >
Service & Support > Download >
TROVIS-VIEW). The software can also be
supplied on a CD-ROM. Further details
in Data Sheet u T 6661.
communication with 3-pin round connec-
tor, 5 m, order no. 1380-2689
uration over TROVIS-VIEW and Modbus
interface, order no. 1402-1300
weekly program, Theben TR610 top2 G,
order no. 1402-1017
Version [B] Version [C]
•
•
–
–
Version [D]
• •
•
o
• •
o •
15