Versions - Samson TROVIS 5724-8 Series Mounting And Operating Instructions

Design and principle of operation
No initialization (7)
No calibration (8)
Stem extension/retraction canceled (9)
Manual level active
Initialization in progress
Update in progress
Note
The number in brackets indicates the priority
of the E0 to E9 errors (highest priority = 1).
If several errors have occurred, only the
error with the highest priority is shown. The
error with the next highest priority is shown
when the error with highest priority is
remedied.
Information indicated by the decimal point
on the bottom right-hand corner of the dis-
play
− Programmed function of [I] key activated
by digital input.
ON
OFF
− Programmed function of [O] key activat-
ed by digital input.
ON
OFF
− Programmed function of [I] key activated
ON
by on-site operation.
1 s
OFF
14
− Programmed function of [O] key activat-
− Program (program controller) active.
− Program (program controller) stopped.
− Program (program controller) finished.

3.4 Versions

The electric actuator with process controller
is available in four versions [A], [B], [C] and
[D]. These versions are tailored to the
Time
ready-configured applications. In many cas-
es, it is also possible to use the electric actu-
ator with process controller with another de-
vice version for other applications. See Ta-
ble 1.
Time
The ready-configured applications are de-
fined in M0 configuration item. They are de-
1 s
scribed in the Configuration Manual
uKH 5724-8.
Time
ed by on-site operation.
ON
1 s
OFF
ON
1 s
OFF
ON
OFF
ON
1 s
OFF
Note
1 s 1 s
Time
1 s
Time
Time
1 s 1 s
Time
EB 5724-8 EN