Menu 2 Test Print - Riso HC5000T User Manual

Menu 2 Test Print

Prints the data currently retained in the printer for checking.
Use this function to check to see if the settings such as print position and density adjustments are reflected properly.
• The number of printed sheets with the Test Print function is not counted as the "Number of Copies" that is set on a computer.
• If "4.9 Temp Data Clear" of the menu setting has been executed or if setting of no temporary data has been selected (5.8.6 Temporary
Data Retention), message "No Temp Data" is displayed and Test Print cannot be performed.
• If an optional finisher is connected, test print paper is output to the Top Tray regardless of the settings of finisher functions (except for
Inner 3 fold and Outer 3 fold).
1
Press the MENU Key.
2
Press the key to display "Test
Print."
3
Press the OK Key.
4
Check the message and press the OK
Key to print.
One sheet is printed. If the CANCEL/BACK key is
pressed, the screen in step 2 reappears.
After Test Print is complete, you can continue setting.
To exit the setting, press the PRINT/PAUSE key.
2
2-15