Operation; Switching The Device On/Off; The Start Screen; Change Contrast - IMT Analytics FlowAnalyser Series User Manual

6

Operation

6.1 Switching the device on and
off
6.2

The Start screen

6.3

Change contrast

IMT Analytics AG
Check to make sure all the cables and tubes are connected proper-
ly and check compliance with the specifications
The device is switched on and off using a 0/1 switch on the back of the device.
If FlowAnalyser is switched on, the welcome screen appears. After three seconds the
display with the numerical readings appears.
If you wish to change the language of the device delivered, please use the language
selection function (6.16 Set
The quality of display depends on the angle of view. To optimise the quality for read-
ing purposes the contrast must be adapted to the angle of view.
Contrast can be adjusted by pressing the two marked buttons simultaneously.
language).
Operation
(5 Start-up)
6
23