Husqvarna AUTOMOWER 305 Operator's Manual page 50

Hide thumbs Also See for AUTOMOWER 305:
Table of Contents

Advertisement

Symptoms
Cause
Both the mowing
The battery is spent.
and charging times
are shorter than
usual.
The product is
The product has an inbuilt standby peri-
parked for hours in
od according to the Standby time table.
the charging sta-
Refer to
page 37 .
tion.
The hatch is closed but the START but-
ton is not pushed.
Parking mode is activated.
The product is not allowed to operate if
the battery temperature is too high or
too low.
Uneven mowing
The product works too few hours per
results.
day.
The shape of the work area requires
the use of
the product to find its way to all remote
areas.
The
relation to the layout of the work area.
The work area is too large.
Dull blades.
Long grass in relation to the set cutting
height.
Accumulation of grass by the blade
disc or around the motor shaft.
The product de-
Terrain wheels are installed, but the
tects false colli-
Terrain Kit setting is not enabled. Spe-
sions and moves
cial setting is needed to compensate
rearwards and
behavior for additional weight.
turns where the is
no obstacle.
50 - Troubleshooting
Schedule and Standby on
Lawn coverage function for
How often? setting is incorrect in
Action
Replace the battery. Refer to
on page 41 .
No action.
Push the STOP button to open the
hatch. Enter the PIN code and confirm
with the OK button. Push the START
button and then close the hatch.
Change the operating mode. Refer to
Operating mode Park on page 36 .
Check that the charging station is
placed in an area with protection from
the sun.
Increase the mowing time. Refer to
Schedule on page 24 .
Steer the product to a remote area. Re-
Lawn Coverage and Systematic
fer to
Passage Mowing on page 27 .
Check that the correct
How often? val-
ue is selected.
Try limiting the work area or extending
Schedule on
the schedule. Refer to
page 24 .
Replace all the blades. Refer to
place the blades on page 40 .
Increase the cutting height and then
successively lower it.
Check that the blade disc rotates freely
and easily. If not, screw off the blade
disc and remove grass and foreign ob-
Chassis and blade disc
jects. Refer to
on page 39 .
Enable Terrain Kit setting. Refer to
rain kit on page 34 .
1462 - 001 - 24.02.2020
Battery
Re-
Ter-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents