Secure Your Gateway; Security Center; Configure Alert Settings - Yeastar Technology TG100 User Manual

Secure Your Gateway



Security Center



Configure Alert Settings

Upload Certificate Files

Configure Firewall Rules

Security Center
You can check TG gateway security configurations in "Security Center" page. You can
also enter the relevant security settings page rapidly.
Check descriptions of the service port as below.
Option Description
SIP UDP Port UDP Port used for SIP registrations. The default port is 5060.
Port for logging in the web interface. The default port is 80.
HTTP Bind Port
TCP Port usSed for SIP registrations. The default port is 5060.
SIP TCP Port
SIP TLS Port TLS Port used for SIP registrations. The default port is 5061.
SSH port is used to access S-Series underlying configurations to
SSH debug the system. The default port is 8022.
Note: We recommend that you disable SSH if you do not need it.
With FTP service, you can connect to PBX via web browser. The
FTP
default port is 21.
Configure Alert Settings
You can set email notification or call notification for system IP attack and Web attack.
Option
PHONE Notification
Number
Port
Attempts
Interval
Prompt
Description
Whether enable phone notification
Set the phone number to receive alarm notifications.
Choose the GSM/3G port to dial alert call.
The attempts to dial a phone number when there is no answer.
The interval between each attempt to dial the phone number.
Must be longer than 3 seconds, the default value is 60 seconds.
Users will hear the prompt while receiving the phone notification.
TG100 User Guide
64/75