Configure Voip Settings; Group Voip Trunks - Yeastar Technology TG100 User Manual

Interface: Select the network interface. The TG gateway will reach the

destination address using the static route through the selected network
interface.
3. Click Add, you can see the new created static route on the Routing Table.

Configure VoIP Settings



Group VoIP Trunks

 Configure SIP Settings
 Configure IAX Settings
 Configure General Preferences
Group VoIP Trunks
You can manage the VoIP trunks efficiently by grouping the trunks. The group of VoIP
trunks can be selected directly when you are configuring the routes settings.
Procedure
1. Navigate to Gateway > VoIP Settings > Trunk Group, click Add New Trunk
Group.
2. Enter a name in the Group Name field.
TG100 User Guide
56/75