3.4
EPM6000 Transducer Installation
Note
EPM6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
CHAPTER 3: MECHANICAL INSTALLATIONEPM6000 TRANSDUCER INSTALLATION
The EPM6000 Transducer model is installed using DIN Rail Mounting.
Specs for DIN Rail Mounting:
• International Standards: DIN 46277/3
• DIN Rail (Slotted) Dimensions: 0.297244" x 1.377953" x 3" (inches) [7.55mm x 35mm
x 76.2mm (millimeters)].
DIN Rail Installation Steps:
1.
Slide top groove of meter onto the DIN Rail.
2.
Press gently until the meter clicks into place.
FIGURE 3–4: DIN Rail Mounting Procedure
If mounting with the DIN Rail provided, use the Black Rubber Stoppers (also provided).
Release Clip
3–5