V-Switch™ Technology; Measured Values - GE EPM6000 Instruction Manual

2.1.3 V-Switch™ Technology
2.1.4

Measured Values

EPM6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
V-Switch™ Technology is a virtual firmware-based switch that allows you to enable meter
features through communication. This allows the EPM6000 unit to be upgraded after
installation to a higher model, without removing the unit from service.
Available V-Switch™ Keys:
• V-Switch™ 1 (-V1): Volts and Amps Meter - Default
• V-Switch™ 2 (-V2): Volts, Amps, kW, kVAR, PF, kVA, Freq
• V-Switch™ 3 (-V3): Volts, Amps, kW, kVAR, PF, kVA, Freq, kWh, kVAh, kVARh, DNP 3.0
• V-Switch™ 4 (-V4): Volts, Amps, kW, kVAR, PF, kVA, Freq, kWh, kVAh, kVARh, DNP 3.0,
% THD Monitoring and Limit Exceeded Alarms
The following table lists the measured values available in real time, average, maximum,
and minimum.
Table 2–2: EPM6000 Measured Values
Measured Values
Voltage L-N
Voltage L-L
Current per phase
Watts
VARs
VA
Power Factor (PF)
Positive watt-hours
Negative watt-hours
Net watt-hours
Positive VAR-hours
Negative VAR-hours
Net VAR-hours
VA-hours
Frequency
%THD
Voltage angles
Current angles
CHAPTER 2: OVERVIEW AND SPECIFICATIONSHARDWARE OVERVIEW
Real Time Average
X
X
X X
X X
X X
X X
X X
X
X
X
X
X
X
X
X
X
X
X
Maximum Minimum
X X
X X
X X
X X
X X
X X
X X
X X
X X
2–3