Mitsubishi Electric FR-E800 Series Instruction Manual page 277

• On the I/O terminal monitor, the upper LEDs indicate the input terminal status, and the lower LEDs indicate the output
terminal status.
I-2 I-3 I-5 I-6
I-1 I-4
O-1 O-4
O-2 O-5
O-3 O-6
Symbol FR-E800
I-1 RL
I-2 RM
I-3 RH
I-4 —
I-5 —
I-6 —
I-7 MRS
I-8 RES
I-9 STF
I-10 STR
I-11 —
I-12 —
• The decimal point of the last digit on the LED is lit for the input option terminal monitor.
X1 X2 X4 X5
X0 X3
X10 X13
X11 X14
X12 X15
• The decimal point of the second last digit on the LED is lit for the output option terminal monitor.
Y1 Y2 Y4 Y5
Y0 Y3
RA1
RA2
RA3
 Monitoring and resetting cumulative power (Pr.170, Pr.891)
• When the cumulative power is monitored (Pr.52 = "25"), the output power monitor value is added up and is updated in 100
ms increments.
• The values are stored in EEPROM every 10 minutes. The values are also stored in EEPROM at power OFF or inverter
reset.
• Increments and ranges of monitoring on the operation panel or via communication are as follows.
Operation panel
Range
0 to 99.99 kWh
100.0 to 999.9 kWh
1000 to 9999 kWh
276
12. (M) Item and Output Signal for Monitoring
12.2 Monitor item selection on operation panel or via communication
I-8 I-9 I-11 I-12
I-7 I-10
O-7 O-10
O-8 O-11
O-9 O-12
Input terminal
FR-E800-E FR-E800-SCE
— —
— —
— —
— —
— —
— —
— —
— —
DI0 —
DI1 —
— —
— —
X7 X8
X6 X9
DY
Decimal point LED of the last digit LED is always ON
Y6
Decimal point LED of the second last digit LED is always ON
*1
Increment
Pr.170 = "10"
0.01 kWh
0.1 kWh 0 to 9999 kWh
1 kWh
Segments corresponding
to input terminals
The center LED segments are
always ON.
Segments corresponding
to output terminals
Symbol FR-E800
O-1 A,B,C
O-2 —
O-3 RUN
O-4 —
O-5 —
O-6 —
O-7 FU
O-8 SO
O-9 —
O-10 —
O-11 —
O-12 —
The center LED segments are always ON.
FR-A8AY
The center LED segments are always ON.
FR-A8AR
Via communication
Range
Pr.170 = "9999"
0 to 65535 kWh
(initial value)
- Display example -
When signals STF,
RH and RUN are on
Output terminal
FR-E800-E
A,B,C
—
—
—
—
—
—
SO
—
—
—
—
Increment
1 kWh
FR-E800-SCE
A,B,C
—
—
—
—
—
—
—
—
—
—
—