Commissioning - Siemens SINAMICS GL150 Operating Instructions & Installation Instructions

Medium-voltage drive
Table of Contents

Advertisement

Commissioning

When carrying out any work, carefully observe the information provided in Chapter "Safety
instructions (Page 15)".
NOTICE
Material damage caused by transport indicators remaining in the device during operation
In operation, as a result of high temperatures, the transport indicators can become detached
and fall into the device. This can result in material damage.
● Remove the transport indicators before commissioning. Remove any adhesive residue
Detailed information on commissioning and operating the device is provided in the
Commissioning Manual that addresses commissioning engineers.
Incorrect commissioning
Malfunctions can occur as a result of incorrect commissioning and parameterization. This can
result in premature failure and subsequent damage to the drive system. This can result in
death, serious injury or material damage. Incorrectly performed commissioning can result in
the warranty becoming null and void.
It is not permissible to commission the device if it is dirty. Immediately contact Customer
Support. You can find the relevant contact person under "Service & Support".
This device may only be commissioned by electrically skilled persons who have been
adequately trained on this product, and have experience with commissioning this product and
the associated plant and system components. The electrical technician commissioning the
equipment must be trained on the specific product as a result of the differences between the
individual products, e.g. regarding topology and closed-loop control.
Obtain information about the range of SITRAIN training courses available through your local
contact person. Make use of the support and services offered by the responsible Siemens
Service Center when commissioning this equipment. You can find the relevant contact person
under "Service & Support".
SINAMICS GL150 6SL38503UM114PA0Z
Operating Instructions Rev.201910301420 MUSTER
from the transport indicators using methylated spirits.
WARNING
7
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

6sl38503um114pa0z

Table of Contents