Technical Specifications And Drawings; Standards And Regulations - Siemens SINAMICS GL150 Operating Instructions & Installation Instructions

Technical specifications and drawings

Note
Finding technical data and drawings
The technical data and the necessary drawings can be found in "Technical data and drawings"
manual.
B.1

Standards and regulations

Table B-1
Standards
EU directives
CE marking
Protection class
Touch protection
Insulation
Radio interference
level
Environmental condi‐
tions
SINAMICS GL150 6SL38503UM114PA0Z
Operating Instructions Rev.201910301420 MUSTER
Standards and regulations
Directives
DIN EN 61800‑3/VDE 0160 Part 103 (IEC 61800-3)
DIN EN 61800‑4 / VDE 0160 T104 (IEC 61800-4); only to the extent that it can
be applied
DIN EN 61800‑5‑1/VDE 0160 Part 105 (IEC 61800-5-1)
DIN EN 60146‑1‑1 / VDE 0558 T11 (IEC 60146-1-1); only to the extent that it can
be applied
DIN EN 60204‑11 / VDE 0113 T11 (IEC 60204-11); only to the extent that it can
be applied
Machinery Directive:
2006/42/EC + amendments
Electromagnetic compatibility:
2014/30/EU + amendments
According to Low Voltage Direction (only applies to the low-voltage parts, e.g.
the control cabinet
2014/35/EU + amendments
Class 1 in accordance with DIN EN 61140/VDE 0140 Part 1 (IEC 61140)
BGV A3
According to DIN EN 61800‑5‑1 / VDE 0160 T105 (IEC 61800-5-1): Pollution
degree 2 (without conductive pollution), non-condensing
According to DIN EN 61800-3/VDE 0160 Part 100 (IEC 61800-3): no RI sup‐
pression
DIN EN 60721-3-1/2/3 (IEC 60721-3-1/2/3)
B
137