Zoom/Scroll Controls - VeEX OTDR Series User Manual

If the Markers appear off screen, use the Markers button on the right side bar to display the
Markers on screen.
If a marker is moved too close to another, both will move together to ensure minimal distance
between them.
The markers can be moved separately or in tandem (or 5 markers simultaneously in the LSA
attenuation measuring mode).
At the top of the screen next to the markers, the position of the marker with respect to the
beginning of the optical fiber is indicated in kilometers, miles or feet.
The parameters of the trace corresponding to the markers' position and measurement mode
will be displayed at the bottom of the screen.
8.2.2

Zoom/Scroll Controls

Zooming operations are possible in both Events and Measure mode.
• Zoom/Scroll icon - Toggle between and enables Zoom/Scroll mode.
• Zoom mode - Magnifying glass icon appears on screen. Draw a rectangular box
over the trace with the stylus to create a zoom area. Visible part of the trace in
Preview window is marked with dotted rectangle.
• Scroll mode – Trace can only be scrolled after zooming. After the Hand icon
appears on screen, the trace can be dragged in any direction. The mode resets to
Zoom immediately after one scroll operation has been completed.
• Zoom Out - Resets display area.
• Zoom Lock - Locks horizontal and vertical controls so zoom aspect is kept uniform.
OTDR Series e-Manual, RevE00
Zoom Operations
Page 95 of 128