VeEX OTDR Series User Manual page 28

• LAN (USB adapt): Configure network parameters for Trace Route tests. For LAN
connection, an external USB OTG adapter for 10/100BaseT connectivity is required.
• Backlight: User defined settings when unit is used on Battery or AC power including
Brightness settings. To help improve the battery autonomy and preserved LCD life,
configure the timer to turn off the backlight if the unit is not in use and adjust the
duration of the idle time. Once the timer is active and the backlight is turned off, any
action on the test set (touch screen, keypad) will turn on the backlight again.
• Global: Various settings including:
General Settings
• Language: English, German, French, Chinese, Japanese, Korean and others (de-
pends on software version). You must reboot the device to fully activate the new
language.
• Units: Measurement system (English - feet or Metric - meter).
• Audible Alarm: When enabled, the test set will sound (beep) when alarms and
errors are detected or when battery runs low.
• Show Password: Shows/Hides username and password associated with FTP and
related IP functions.
• User Interface: The USA user interface version presents SONET/DSn application-
oriented menus, while the International setting is open to all settings.
• WiFi Auto Connect: After successfully connecting to a WiFi access port, the unit
will attempt to connect automatically to the same AP after the unit is turned off and
then turned back on.
• RTU-410 (OTDR) Emulation Mode: Enables remote control of the FX150 OTDR
using API commands.
• OTG Port Mode: Configures the micro USB port for any USB device connected via
an OTG cable. Later models will detect and configure automatically the OTG port to
host or device mode.
 Host: Enables the micro USB port to connect with USB devices such as a
 Device: Enables the micro USB port to connect directly with a Windows
• Telnet/SSH: Allows telnet connection to the unit.
• Share Results Access via USB: Turn ON to enable direct transfer of saved results
from a V150 unit to a Windows PC. To directly transfer files, connect the unit to a PC
via an OTG cable, set the OTG port to Device mode and turn ON Share Results.
When turned OFF results are saved to the internal partition of the unit and can be
transferred to a USB using the To USB function in the File Manager. For more
information about saving OTDR results, see
• NTP Time Service: (optional) Turn ON to allow the test unit periodically to obtain the
current time from a public time server. Whenever the test set is connected to the
Internet, the time will be updated.
OTDR Series e-Manual, RevE00
Turn OFF RTU-410 (OTDR) Emulation Mode when not being used. It
can conflict with the OTDR Server button in the OTDR app.
USB stick or Fiberscope. USB devices will not be recognized if the OTG
port is not set to Host mode.
PC for the Share Results function.
Section 8.5 Results.

Page 28 of 128