VeEX OTDR Series User Manual page 119

2. Before testing from the opposite direction, re-configure the Autosave Trace ID settings to
reflect the new test direction so the filename will be correct with the first trace.
• Set Increment to Trace ID and Other tab to enter Origin and Termination sites.
• The Trace ID label should reflect the physical location for the opposite direction (e.g.
first trace labelled "origin_end" and the second opposite end labelled "end_origin").
• Reset or Force the Trace Index counter number to the fiber port you began testing at;
otherwise, it will continue incrementing from the previous test. To change the number,
tap Trace Index.
OTDR Series e-Manual, RevE00
Bidirectional Trace – First Fiber to Test
Bidirectional Trace – Reverse Direction testing
Page 119 of 128