VeEX OTDR Series User Manual page 29

If R-Server is used, the time service option can be made unavailable by the
R-Server administrator. This ensures that all test sets have the same time,
which is set by the R-Server.
Storage Settings (not currently supported for OTDR/OPM/FiberScope results)
• File Name Prefix: Not used for OTDR file naming. Use AutoSave Setup Menu
• Profile Deleting: Auto Delete or Prompt before deleting profile.
• Profile Saving: Auto Overwrite or Prompt before saving profile.
• Result Saving: Manual or Prompt before saving results.
• Advance Saving: Turn On to add extra information to the results file to be uploaded
to a centralized R-server. Requires Advanced Management Option.
Save Settings
• Maximum Number of Screenshots: Sets the maximum number of screenshots that
can be saved on the unit.
• Date & Time: Sets the date and time. Daylight savings are enabled automatically.
• More: Additional options including:
• Remote Access: Settings for accessing and/or controlling the test set and the
information it contains using the VeEX ReVeal software or VNC Server/Viewer. For
more information on Remote Access, see the V150 Common Functions Manual on
www.veexinc.com.
For more information on using the ReVeal software, refer to the ReVeal User
Manual on the individual platform's page at www.veexinc.com.
• Power: Provides information about the unit's current power source and information
about the battery. It also provides settings for putting the unit in Standby mode.
• EZ Remote: Allows remote access function that can be used across the Internet or
Network Segments without requiring public IP addresses, port forwarding, or holes in
the firewall. No special setup is required, only the test set serial number is needed.
For additional details see the V150 Common Functions Manual on
www.veexinc.com.
OTDR Series e-Manual, RevE00 Page 29 of 128